Tired of having nasty hard water stains on your glass shower doors? Is your squeegee alone not enough? Try this solution!
*This post may contain affiliated links. For more information on this and how you can support my blog, please see my Disclosure page!*
Ingredients:
- 1 Tablespoon Baking Soda
- 1 Tablespoon White Vinegar
- 1 Tablespoon Blue Dawn Dish Soap
- ½ Cup Water
- Handheld Wand Sponge
- Funnel
- Bowl and Spoon
- Measuring Spoon and Cup
- Squeegee
Step 1:
Measure out 1 Tablespoon of baking soda and add it to a mixing bowl.
Step 2:
Measure out 1 Tablespoon of white vinegar and add it to the baking soda in the mixing bowl. It will start bubbling right away – this is good. Mix the two ingredients together until they make a wet mixture.
Step 3:
Measure out 1 Tablespoon of Dawn dish soap and add it to your mixture. Mix until well combined.
Step 4:
Add the mixture from your mixing bowl into your sponge wand. You can use a funnel for this part to make the pouring a lot easier.
Step 5:
Add the water next to the wand until it’s filled to the top. It will be approximately ½ cup.
Step 6:
Shake up the wand to combine the mixture and the water.
Step 7: How-to Use
While you’re in the shower (maybe even taking a shower), wet the shower door with a cup. Press the little button on the wand and press it into the shower door to get some of the mixture to come out. Move the wand in circles to clean the shower door.
After you’re done covering the whole shower door, rinse it off with a cup of water. You might need a few of them to get all of the soapy mixture off.
Use your squeegee to dry the shower doors like you normally would. Depending on how bad your shower doors are, you may have to do this for several days in row until it’s fully cleaned again and all of the hard water stains are gone!
